To begin, we will apply heat to the back cover to soften the adhesive that holds it, and with the help of a thin tool, we will open a small hole through which we will introduce one or more plastic spikes. with which we will take off the edges and will be less likely to damage the housing.

We remove the five Phillips screws (PH # 00) that hold the shield, disconnect the wireless charging connector and the NFC antenna, and with the help of a flat-tip tool we will take it off.

Remove the four Phillips screws (PH # 00) that hold the upper intermediate housing and unhook it.

We disconnect and remove the damaged front camera that we have to replace.