We will start by removing the back cover. To do this, we will introduce an opening tool between the lid and the frame and unhook it.

It can also be done directly with your hands.

In this step we remove the battery. We will simply leverage with a tool to unlock it.

Now we remove the eighteen Phillips screws (PH # 00) that hold the housing and then unhook it by prying it with the tool.

We will disconnect the components of the motherboard and remove the Phillips screw (PH # 00) that holds it.

Now we can dislodge it.

We will heat the screen at about 60 ° C for about one minute. We will keep the temperature elevated during the process to keep the adhesive soft.

With the hot screen, we introduce a thin tool between it and the frame and slide it around the contour to remove the glue.

We will also have to take off the central part of the chassis screen. For this we will use a card or letter.

Now, we remove the home key and take off the flex and the audio connector. Once detached, we will slide it through the hole in the chassis.