To begin, we apply heat to the back cover to soften the adhesive that holds it, and with the help of one or more plastic spikes we will take off the back cover.
Step 2 NFC antenna
Manually open the camera rail, remove the six Phillips screws (PH # 00) that hold the intermediate housing, and with the help of a flat tool we will unhook the intermediate housing.
Step 3 We disconnect battery
We disconnect the battery to work with greater security.
Step 4 Speaker
We remove the seven Phillips screws (PH # 00) that hold the speaker module, and with the help of a flat tool we will unhook it.
Step 5 Components
We disconnect all components that are connected to the faulty auxiliary board.
Step 6 Tray
We remove the tray from the cards.
Step 7 Auxiliary board
We remove the Phillips screw (PH # 00) that holds the auxiliary plate, and with the help of a flat tool we will unhook it.
Step 8 Fingerprint reader
We remove the two Phillips screws (PH # 00) that hold the fingerprint reader that we have to replace, and with the help of flat tweezers we will take it off.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.