We start by heating the back cover to soften the adhesive. With the hot lid, we introduce a flat tool, plastic if possible, and slide it around the contour until it takes off.
Step 2 Remove intermediate housing
Now we take out the upper housing / antenna. To do this, remove the four Phillips screws (PH # 00) that hold it in order to disengage it.
Then we take out the central intermediate casing. Remove the six Phillips screws (PH # 00) and disengage.
Step 3 Remove intermediate lower housing
To remove this casing / antenna, remove the four Phillips screws (PH # 00) that hold it and disengage it.
Step 4 Disconnect components
In this step we disconnect the audio connector, the battery, the flexes of the screen and remove the front cameras.
Step 5 Removing the motherboard
We remove the three Phillips screws (PH # 00) that hold the motherboard and remove the SIM and SD trays. Now we can undo the motherboard.
Step 6 Rear camera
Now all you have to do is disconnect the rear camera from the motherboard.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.