To begin we must apply heat to the transera case to soften the adhesive, and with the help of one or more plastic tines we will remove all the edges of the casing.

Remove the thirteen Phillips screws (PH # 00) that hold the frame, but before proceeding to unhook it we must remove the tray of the cards, and now we can go unhooking the frame with the help of a plastic spike.

We disconnected the battery for safety.

We disconnected the two interconnection flexes.

Disconnect all components of the motherboard, remove the Phillips screw (PH # 00) that holds the plate to the chassis and we can lift the base plate.

We take off the vibrator with the help of tweezers.

Disconnect the coaxial cable and detach the plate with the antenna contact.

We take off and remove the receiver.

We extract the coaxial cables and take off the battery.

Remove the two Phillips screws (PH # 00) that hold the fingerprint reader, and we can disconnect and remove it.

We take off the auxiliary plate of the screen that we are going to replace.