First we apply heat to the back cover and with a pick we take off the case around its entire contour.

With a fine plastic tool we disconnect the flex from the fingerprint reader to be able to separate the housing from the terminal.

With a Phillips-type screwdriver (PH # 00) we extract the sixteen screws that hold the intermediate casing and extract the sim tray to access the interior of the terminal.

With a fine plastic tool we are extracting the intermediate casing all around its contour until it is separated from the terminal.

With a fine tool we disconnect the battery to avoid any unforeseen event.

With a fine tool we lift the handset from its base and extract it from its housing.