First, we will apply heat to the back cover, in order to soften the adhesive that holds it, and with the help of a plastic pick we will take off all the edges of the case.

We will extract the card tray.

We extract the eighteen Phillips screws (PH # 00) that hold the housing, we remove the lower adhesive that is attached to the speaker, and with the help of a fine tool we will unhook all the edges.

We will disconnect the battery to work with greater safety.

We take off and disconnect the front camera.

We disconnect and remove the rear cameras from the motherboard.

We disconnect the interconnection flexes and the coaxial cable, extract the Phillips screw (PH # 00) that holds the motherboard, and with the help of a flat tool we will lift it.

With the help of tweezers we will detach the area of the contacts, and with a flat and thin tool we will detach the damaged headset.