To start, we extract the card reader with the help of a SIM removal tool.

We apply heat to the back cover to soften the adhesive that holds it (approx 5min at 75º C), we introduce a fine opening tool and we open enough hole to insert a plastic spike and with it we will take off all the edges of the housing without damaging it .

We remove the five Phillips screws (PH # 00) that hold the lens of the rear cameras, then with a fine tool we unhook it and remove it.

We remove the thirteen Phillips screws (PH # 00) that hold the intermediate casing and with a fine tool we unhook all the edges and extract it.

We disconnect the fingerprint reader.

We will disconnect the battery to work more safely.

Finally, with the help of a fine plastic tool, we pry and remove the speaker.