Before you start, make sure the computer is turned off.

Remove the back cover, unhooking the entire contour, starting from the slot shown in the photos.

Use a plastic opening tool to avoid scratching.

Remove the battery by pulling on the bottom.

Remove the SIM and SD cards.

Remove the 11 screws that secure the intermediate housing.

Note that one of the screws is hidden by a warranty seal.

Separate the intermediate housing, releasing the plastic hooks all around.

Remove the side keys.

Unplug the front camera from the motherboard.

To remove it, gently pull the flex.

Unplug and remove the rear camera.

Disconnect the flex from the volume control buttons.

Unplug and detach the touch screen data flex.

Take off the power button.

Disconnect the display flex.

Remove the 2 screws securing the base plate.

We will turn the motherboard to finish disconnecting it.

Finally, we disconnected the interconnection flex and the upper end of the coaxial cable.