Manuales / Primux Delta 6 / Vibrator | Nadie Me Llama Gallina

Primux Delta 6 - Vibrator

Guide with all the steps necessary for you to change the components of the Primux Delta 6 (PTDE6) yourself.

Difficulty

TutorialsSmartphonesPrimux TechPrimux Delta 6Vibrator

For this tutorial you will need the following spared parts and tools

Pinza antiestática curva ESD-15

2,98 €

Opening tool Smartphone, tablet

1,47 €

Screwdriver phillips Head Size 00

1,54 €

Antistatic and ESD tactile glove, size S

2,91 €

Generic vibrator 7,98 x 2,79 x 10,03 mm with cables

0,78 €

Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 Back case

To begin with we must remove the back cover.

Step 2 Battery

We extract the battery.

Step 3 Intermediate housing

Remove the 16 Phillips screws (PH # 00) that hold the intermediate housing, and with the help of a plastic tool we will unhook all the edges of the housing.

Step 4 Flex with side push buttons

We disconnect the flex with lateral push buttons.

Step 5 Frontal camera

We disconnect and remove the front camera.

Step 6 Rear camera

We disconnect and remove the rear camera.

Step 7 Components

We disconnect the components that are connected on the motherboard.

Step 8 Motherboard

Remove the 2 Phillips screws (PH # 00) that hold the base plate and we raised to the area where the battery was, and so we can disconnect the flex that is connected by the back of the plate.

Step 9 Vibrator

Take off the vibrator from the motherboard, and we will desolder it.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.

Share this tutorial