We will start by removing the back cover, for this we will use a plastic opening tool to separate it from the phone.

After removing the back cover we will have access to the battery. Removing it will be very easy using the plastic opening tool.

Before removing the intermediate housing we will have to remove the SIM and microSD cards. Using a clamp or fingers, we will pull the cards to extract them.

To remove the intermediate casing, first we will have to remove the ten Phillips screws (PH # 00) that hold this to the chassis. Then we introduce a spike between the frame and the casing to release the notches to which it is still attached.

To get to the handset we will have to remove the motherboard. For this we will remove the only screw that still holds it and disconnect the components.

In this step, we disconnected the interconnection flex from the base plate to the bottom plate and the flex of the front camera.

Now we will disconnect the flex from the digitizer and the touch screen.

From the bottom plate we will disconnect the coaxial antenna cable.

By removing the motherboard we will have access to the headset. We take it off and we can remove it.