To begin we must remove the back cover, for this we must apply heat, and introduce a sufficiently fine tool and then introduce one or more plastic tines to avoid damaging the case.

We extract the eleven Phillips screws (PH # 00) that hold the intermediate housing, and using a flat tool we will unhook it.

We disconnected the battery for safety.

We remove the eight Phillips screws (PH # 00) that hold the speaker and with the help of a flat tool we will unhook it.

Remove the two Phillips screws (PH # 00) that hold the auxiliary plate, disconnect all components, and lift the plate to disconnect the coaxial cable from the back.

Unhook the charging connector, and with the help of an extraction tool we will remove the tray from the cards.

We extract the two Phillips screws (PH # 00) that hold the fingerprint reader and remove it.

We disconnect the coaxial cable, and with the help of a pair of tweezers we will take off the flex with a card reader that we have to replace.