We remove the tray from the cards, and with the help of a flat tool we will disengage the casing.
Step 2 Upper intermediate housing
We extract the ten Phillips screws (PH # 00) that hold the intermediate housing and with the help of a flat tool we will unhook it.
Step 3 We disconnected battery
We disconnected the battery for safety.
Step 4 Lower intermediate housing
We extract the seven Phillips screws (PH # 00), lift the load connector, and we can unhook the lower intermediate housing.
Step 5 Auxiliary plate
We disconnect all the components that are connected in the auxiliary plate, and with the help of a flat tool we will remove it.
Step 6 Fingerprint reader
We extract the two Phillips screws (PH # 00) that hold the fingerprint reader that we are going to replace, and with the help of a flat tool we take it off.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.