First we have removed the tray for the cards.

We apply heat to the back shell to soften the adhesive that holds it, with the help of a thin tool we will open hollow to introduce one or more plastic tines, and thus detach the back cover without damaging it.

Remove the eleven Phillips screws (PH # 00) that hold the intermediate housing, and with the help of a flat tool we will unhook it.

We will disconnect the battery to avoid possible damage.

Disconnect the components that are connected to the motherboard, and remove the rear cameras.

We disconnect the flex from the upper module, the coaxial cables, and we can unhook the motherboard.

We extract the five screws that hold the elevator motor, and with the help of flat tweezers we will detach it from the chassis of the phone.

Remove the upper module taking care not to damage the flex when removing it.

Take off the cover, remove the two Phillips screws (PH # 00) that hold the shield and we can remove the flex with the components.

To finish, we will take off with the help of flat clamps the broken handset that we have to change.