We start by removing the back cover. To do this, we introduce a flat tool between it and the frame, which we will slide around the contour to separate it.
Step 2 Disconnect components
Remove the Phillips screw (PH # 00) that holds the cover of the battery connectors and fingerprint reader, and disconnect the latter to be able to separate the back cover.
Step 3 Remove components
Take off the NFC antenna and disconnect it to be able to remove it.
Step 4 Remove internal casing
Remove the nine Phillips screws (PH # 00) that hold the casing and disengage it.
Step 5 Disconnect components
In this step we disconnect the components of the motherboard.
Step 6 Removing the motherboard
We remove the SIM / SD tray and we can undo the chassis plate.
Step 7 Proximity sensor
We remove the receiver and we can take off the sensor of the chassis.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.