We start by applying heat to the back of the terminal and with the help of a fine tool we take off the battery cover around its entire contour until it is detached from its housing

Next, we peel off the adhesive that is on the camera lens and extract the eight Phillips type screws (PH # 00) and remove the camera lens from its housing.

Next we disconnect the fingerprint reader connector and with the help of a Phillips-type screwdriver (PH # 00) we extract the five screws from the bottom of the terminal, then we remove the sim tray and with the help of a fine tool we extract the intermediate housing by all its contour

The next step will be to disconnect the battery with the help of a fine plastic tool to avoid incidents

We continue in the lower part of the terminal, removing the speaker, first we will extract the three Phillips type screws (PH # 00) and with the help of a fine tool we extract it from its housing.

After removing the speaker, we will remove the auxiliary plate for this we will remove all the connections that are on it and we can extract it with the help of a fine tool

Then with the help of a fine tool we will extract the vibrator by detaching it from its housing