To begin, we remove the tray from the cards with an extraction tool .

We must remove the back cover, for this we must apply heat with a thermal mat, then with the help of a tool with suction cups we open a small gap between the back cover and the phone chassis, then we introduce a tool thin enough and then a or more plastic spikes so as not to damage the housing.

To disconnect the fingerprint reader we remove the Phillips screw (PH # 00) and with the help of a tool we unhook the cover that protects the connector and we can disconnect the reader.

Remove the 15 Phillips screws (PH # 00) that hold the intermediate housing, and using a flat tool we will unhook the lens. Then with a thin metal tool we take off the intermediate housing and with the help of some plastic spikes we lift it.

We disconnect the battery to work more safely.

We remove the adhesives with the help of a fine plastic tool and with it we will disconnect the connectors and remove the cameras.

We disconnect the coaxial cable and the interconnecting flexes from the motherboard, then remove the Phillips screw (PH # 00) and with the help of a flat plastic tool we pry and remove the motherboard.

With the help of tweezers and a metal tool we extract the handset.