To start we will remove the SIM card reader with the help of a SIM removal tool.

We will apply heat to the back shell (about 75ºC for about 5-7 min approx) to soften the adhesive that holds it, and with the help of a fine enough tool and a suction cup, we will make a hole to insert one or more plastic spikes and This way we will not risk damaging the case.

We remove the eleven Phillips screws (PH # 00) from the top (intermediate casing).

With the help of a fine plastic tool we unhook the casing and extract it.

We disconnect the battery to work more safely.

We disconnect the front camera and extract it.

We disconnect the three rear cameras and extract them.

We disconnect all the components from the motherboard (coaxial cables, charging connector flex, interconnection flex and the display flex).

Finally, we remove the two Phillips screws (PH # 00) that hold the motherboard and with the help of a flat plastic tool we unhook it and remove it.