To begin we must remove the tray of cards.

We extract the 2 Torx screws (T4) and with the help of a metal tine we uncouple the housing.

Remove the 2 Phillips screws (PH # 00) that hold the shield, disconnect the battery connector and take it off.

We disconnect and remove both cameras.

Disconnect all components that are connected to the motherboard.

We extract the 5 Phillips screws (PH # 00) that hold the base plate and we can remove it.

We disconnect and remove the components from the bottom, to be able to remove the front button and thus avoid damaging it when taking off the screen.

We apply heat to the screen, and with the help of one or more plastic prongs we take off the screen that we are going to replace.