Manuales / Motorola One Vision / Vibrator

Motorola One Vision - Vibrator

Guide with all the necessary steps so that you can change the Motorola One Vision components (XT1970-3) yourself.

Difficulty

TutorialsSmartphonesMotorolaMotorola One VisionVibrator

For this tutorial you will need the following spared parts and tools

Set of 5 metal picks for opening

3,09 €

Heat-opening thermal mat, CPB320

69,61 €

SIM card removal tool for all brands

1,61 €

Opening tool Smartphone, tablet

2,19 €

Pinza antiestática ESD redondeada

3,06 €

Set of professional tools for opening smartphones and tablets

18,97 €

Special SAT 0.75mm high friction PVC pick

1,07 €

6-in-1 screwdriver, K-8107 with different heads, in blister

7,52 €

Generic vibrator 11,93 x 7,98 x 3,50 mm

1,04 €

Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 SIM tray

With a SIM extraction tool we remove the SIM tray.

Step 2 Back case

We apply heat to the back cover for two minutes at eighty degrees. We introduce a metal spike between the central housing and the rear housing. We exchanged it for a plastic spike to avoid scratching the housings. We perform the entire contour by detaching the housing until it is completely detached.

Step 3 Intermediate housing

Unscrew the Phillips screws (PH # 00) that hold the intermediate housing and unhook it.

We disconnect the flex from the fingerprint reader and remove the intermediate housing and the battery cover.

Step 4 Speaker

Unscrew the Phillips screws (PH # 00) that hold the speaker module and remove it.

Step 5 Components

We disconnect the interconnection flex and the two coaxial cables.

Step 6 Auxiliary board

Unscrew the Phillips screw (PH # 00) that holds the auxiliary plate and remove it.

Step 7 Vibrator

We take off and remove the vibrator.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.

Share this tutorial