With a SIM extraction tool we remove the SIM tray.

We apply heat to the back cover for two minutes at eighty degrees. We introduce a metal spike between the central housing and the rear housing. We exchanged it for a plastic spike to avoid scratching the housings. We perform the entire contour by detaching the housing until it is completely detached.

Unscrew the Phillips screws (PH # 00) that hold the intermediate housing and unhook it.

We disconnect the flex from the fingerprint reader and remove the intermediate housing and the battery cover.

We disconnect the flex from the battery.

We take it off with the help of an opening tool. We can dip the opening tool a little in alcohol to help take off the battery more easily and remove it.

We apply heat to the screen for two minutes at eighty degrees. We introduce a metal spike between the central housing and the screen, we exchange it with a plastic spike to avoid scratching the housing. We perform all the contour, taking off the screen.

We disconnect the flex from the screen and take it off the central housing. We separate the screen completely and remove it.