With a SIM extraction tool we remove the SIM tray.

We heat the back shell to eighty degrees for two minutes.

We introduce a metal prong between the central housing and the rear housing. We exchanged it for a plastic pick to avoid scratching any casing.

We do all the contour taking off the back cover.

Unscrew the Phillips screw (PH # 00) that holds the metal sheet and remove it.

We disconnect the flex from the fingerprint reader.

We remove the back cover completely.

Unscrew the Phillips screws (PH # 00) that hold the NFC antenna and remove it.

We disconnected the flex from the battery. We take it off and remove it.

We apply heat to the screen for two minutes to eighty degrees.

We introduce a metal prong between the central housing and the screen. We exchange it for a plastic spike so as not to scratch the casing.

We will do all the contour taking off the screen.

We disconnect the flex from the battery screen and take it off the center case.

We remove the screen.