Manuales / Motorola Moto G7 Power / Vibrator

Motorola Moto G7 Power - Vibrator

Guide with all the necessary steps so that you can change the Motorola Moto G7 Power components (XT1955-4) yourself.

Difficulty

TutorialsSmartphonesMotorolaMotorola Moto G7 PowerVibrator

For this tutorial you will need the following spared parts and tools

Set of 5 metal picks for opening

3,09 €

Heat-opening thermal mat, CPB320

69,61 €

SIM card removal tool for all brands

1,61 €

Opening tool Smartphone, tablet

2,19 €

Pinza antiestática ESD redondeada

3,06 €

Set of professional tools for opening smartphones and tablets

18,97 €

Special SAT 0.75mm high friction PVC pick

1,07 €

PREMIUM screwdriver with 24 magnetic replacement bits

10,41 €

Generic vibrator 10,4 x 7,95 x 3,18 mm

1,83 €

Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 SIM tray

With a SIM removal tool we remove the SIM tray.

Step 2 Back case

We apply heat to the back case for two minutes to eighty degrees.

We introduce a metallic prong between the central housing and the rear housing, we exchange it with a plastic prong so as not to scratch any housing.

We will do all the contour taking off the back cover completely.

Step 3 Fingerprint reader

We remove the housing that protects the flex from the fingerprint reader and disconnect it. We remove the back cover.

Step 4 Bottom antenna

Unscrew the Pentalobe screws (TS3) that hold the lower antenna and remove it.

Step 5 Components

We disconnected the interconnection flex and the coaxial cable.

Step 6 Auxiliary plate

Unscrew the Pentalobe screws (TS3) that hold the motherboard and remove it.

Step 7 Vibrator

We take off the vibrator and remove it.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.

Share this tutorial