We introduce an opening tool between the frame and the lid to release it from the chassis.

We remove the nineteen T4 torx screws that hold the intermediate casing. These screws are quite soft and are stuck together. It is important that the screwdriver fits perfectly so as not to eat your head.

We will also disconnect the flex from flash and sensors.

In this step we disconnect the battery and remove the stickers.

Now, we disconnect the vibrator, the flex from the home button, the screen button and the audio connector contacts.

Now we can remove the motherboard. Then we will take off the battery and the flex of the screen.

We will heat the screen at about 60 ° C for about one minute. Then, we introduce an opening tool between the frame and the screen to detach it.

All that remains is to unstick the button on the screen.