Motorola Moto E5 Plus - Auxiliary plate

Guide with all the necessary steps so that you can change the Motorola Moto E5 Plus components (XT1924-1) yourself.

Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 SIM tray

With a SIM removal tool, remove the SIM tray.

Step 2 Back case

We heat the terminal with a thermal mat at 80º for a minute and a half.

We introduce an opening tool between the back shell and the terminal to be able to introduce then a plastic spike and make, with care, the contour, taking off the back cover.

With an opening card we just separated the back cover.

Step 3 Fingerprint reader

Unscrew the Phillips screws (PH # 00) that hold the metal plate that covers the connector of the fingerprint reader.

We remove the metal sheet. We disconnect the flex from the fingerprint reader.

Step 4 Intermediate housing

Unscrew the Phillips screws (PH # 00) that hold the intermediate housing with the terminal. We remove it.

Step 5 Antenna module

Unscrew the Phillips screws (PH # 00).

We disconnected the interconnection flex from the auxiliary plate.

We raise the antenna module with the auxiliary plate at the same time.

Step 6 Auxiliary plate

Unscrew the Phillips screws (PH # 00) that hold the auxiliary plate with the antenna module.

We removed the antenna module.

We disconnect the coaxial cable from the auxiliary plate. And we removed it.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial