We will start by removing the back cover. To do this, we will have to remove the two Pentalobe 0.8 screws (TS1) that hold the housing at the bottom.

We introduce an opening tool between the casing and the frame, carefully prying it off.

Before separating it, we will have to disconnect the flex from the fingerprint sensor and the one from the screen.

Now we remove the Phillips screw (PH # 00) that holds the shield and remove it to disconnect the sensor.

We take out the three Phillips screws (PH # 00) that hold the shield that covers the screen connector and move it away. Now we can disconnect the screen and remove it.

To finish, we took out the two Phillips screws (PH # 00) that hold the button shield in order to remove it.