First of all we will have to extract the tray of the cards with the help of the extraction tool.
Step 2 Back case
Remove the two Pentalobe 0.8 screws (TS1) from the bottom of the housing, and with the help of a plastic tine we will unhook all the edges of the housing.
Step 3 Speaker
We extract the seven Phillips screws (PH # 00) that hold the speaker module and with the help of a flat tool we unhook it.
Step 4 Components
We disconnected the coaxial cable, the interconnection flex and the front button flex.
Step 5 Auxiliary plate
We extract the Phillips screw (PH # 00) that holds the plate and we can take it off.
Step 6 Front button
We extract the Phillips screw (PH # 00) that holds the shield of the button that we are going to replace and finally we will take off the flex of the shield to place the new one.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.