We start by heating the back cover to soften the adhesive. We will heat it to 60ºC for about a minute. With the hot lid, we will slide a flat opening tool all the way around to remove the adhesive.
Step 2 Remove internal casing
Remove the eleven Phillips screws (PH # 00) that hold the inner casing and unhook it.
Step 3 Removing the motherboard
Disconnect the components of the motherboard, remove the SIM / SD tray and disengage the base plate of the chassis.
Step 4 Volume pushbuttons
Now all that's left is to take off and disengage the flex from the chassis.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.