Release the lid by moving the plastic opening tool around the mobile.
You will hear "click" as you release the lid.
Step 2
Remove the cap and release.
Step 3 Battery
Remove the battery.
Step 4 Screws
To disassemble the housing it is necessary to remove the 11 Phillips screws.
Step 5 housing
Release the plastic tabs with tweezers or an opening tool.
Shut off the casing.
Step 6 Disconnect base plate.
Disconnect the coaxial cable and the 3 connectors.
Step 7 Remove the motherboard
You must take off the headset to remove the motherboard.
Step 8 Bottom module
The lower module is held by a Phillips screw and glued with glue.
Step 9 Bottom module
Peel off the lower module by sliding underneath some plastic opening tool or a pick.
If you heat the area with the "HOT GLASS" it will take off much easier.
Step 10 MUSB charging connector flex and vibrator
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.