We remove the card tray, and with the help of a fine tool we will unhook all the edges of the housing.
Step 2 Intermediate housing
We remove the eleven Phillips screws (PH # 00) that hold the intermediate housing, and using a flat-tipped tool, we will unhook the housing.
Step 3 We disconnect the battery
We disconnect the battery to work with greater safety.
Step 4 Bottom cover and speaker
We extract the eight Phillips screws (PH # 00) that hold the cover and we will unhook it with a flat tip tool.
Step 5 Auxiliary board
We disconnect the components that are connected to the auxiliary plate, and with the help of a flat tool we will lift the auxiliary plate.
Step 6 Vibrator
We take off the vibrator with the help of a metal tool.
Step 7 Cameras
We disconnect and remove the rear cameras and the front camera from the motherboard.
Step 8 Components
We disconnect all the components that are connected to the motherboard.
Step 9 Base plate
We lift the base plate with the help of a flat tool.
Step 10 Side push buttons
With the help of flat tweezers we will detach the area of the contacts, and with a metal tool we will detach the flex.
Step 11 Google push button
We take off the flex from the Google assistant.
Step 12 Handset
With the help of a fine tool we will take off the headset.
Step 13 Proximity sensor
We will also take off the proximity sensor.
Step 14 Drums
We take off the battery with the help of a suction cup, and with a tool we will make a lever to be able to take off the battery.
Step 15 Fullscreen
Finally, we only have to remove the coaxial cable that is on the side of the screen chassis that we have to replace.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.