With the help of extraction tool, we remove the SIM / SD tray.

With the help of a thin metal tool, which we introduce between the back cover and the phone and then insert a plastic spike to avoid scratching the terminal, and proceed to follow the contour of the terminal separating both parts.

Unscrew the four Phillips screws (PH # 00) that hold the plastic protector, remove it, and with a flat tool we release the battery connector.

With the help of a screwdriver we remove the five Phillips screws (PH # 00) that hold it, and with a flat tool we remove it

With the help of a flat tool we disconnect the flex from the screen, with tweezers

we lift the adhesive protector that covers the camera connector, disconnect it and remove it.

With a flat tool we will lift the motherboard from a corner and remove it from its housing.

With a fine metal tool we proceed to insert it between the handset and the phone's chassis, once introduced to the bottom we will gently pry to remove the handset.

With a fine tool we take off the flex from the base carefully, then with a metal spike we take off the side push buttons and remove it.

With the help of a fine tool, we take off the flex from the base, take it off and remove it.

Using a plastic tool and carefully lift the battery until we have access below, and introduce a spatula type plastic tool and peel off the battery adhesive

With a screwdriver we release the eight Phillips screws (PH # 00) that hold the lower case and remove it with the help of a flat tool.

With the help of a thin tool we will release the coaxial cable, and the connectors that are connected to the auxiliary plate, and proceed to lift the auxiliary plate and remove it from its housing

Finally with a thin tool we take off the vibrator from the broken screen that we have to replace.