We apply heat to the housing to soften the adhesive that holds it, and with the help of a plastic opening tool we will take off all the edges of the housing.

We remove the adhesive that is left by the edges of the housing, remove the eight Phillips screws (PH # 00) that hold the housing and with the help of a flat tool we will unhook it.

We disconnect the battery to work with greater security.

We remove the tray from the cards.

We disconnect all the components that are connected on the motherboard.

We lift the motherboard with the rear cameras connected, and we must disconnect the flex from the charging connector that is connected at the bottom of the motherboard.

We disconnect the damaged rear cameras, and we will be able to put the new ones we have in place.