Specifications

Before you start, make sure your mobile is turned off.

To begin with we will remove the back cover. For this we will use an opening tool and sliding it between it and the intermediate housing, we will unhook it from the notches that hold it.

Remove the 13 Phillips screws that hold the middle housing.

Use the metal spatula to disengage the lower module.

Separate the lower module from the rest of the housing.

Separate the rest of the intermediate casing.

Disconnect the upper ends of the antenna coaxial cables.

Unplug the lower flex and the battery connector.

Disconnect the cameras from the motherboard.

Remove the motherboard to access the components.

We advise you to use finger condoms when holding the motherboard. This will prevent damage from electrostatic discharges.

Finally, take off the vibrator from the chassis with a curved tip tool.