We start by removing the SIM / SD tray to remove the back cover.
Step 2 Remove back casing
We introduce an opening tool between the frame and the housing, prying it loose.
Step 3 Remove plate shield
We remove the seven T4 Torx screws that hold the antenna module with base plate shielding and then unlock it.
Step 4 Disconnect components
Disconnect the components connected to the motherboard and then remove the three Torx T4 screws that hold it.
Step 5 Removing the motherboard
We will raise the plate with care since we still have to disconnect the flex from the display and the lower microphone
Step 6 Flex with microphone and speaker contacts
To get to the flex we will have to remove the battery and the speaker module. For this we can see the battery guide.
It only remains to take off the flex of the chassis.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.