Innjoo Max 2 - Auxiliary plate with charging connector

Guide with all the steps necessary for you to change the auxiliary plate of the Innjoo Max 2 yourself.

Difficulty
1
2
3
4
5
TutorialsSmartphonesInnjooInnjoo Max 2Auxiliary plate with charging connector

Tutorial: Step by step

Step 1 Back case

First we remove the back cover. For this, we will leverage with the opening tool in the notch that brings with this purpose.

Step 2 Remove intermediate housing

Remove the ten Phillips screws (PH # 00) that hold the casing and undo it by loosening the notches that hold it.

Step 3 Disconnect components

We disconnected the battery, the screen flexes and the coaxial cable.

Step 4 Removing the motherboard

Remove the screw that holds the motherboard and remove the battery so that we can lift it. We will not be able to remove it since it is still connected to the interconnection flex.

We will disconnect the cable to be able to remove it.

Step 5 Speaker and vibrator

In this step, we will desolder the vibrator and the loudspeaker module of the auxiliary plate.

Step 6

Now we will take off the main flex of the chassis and disconnect the coaxial cable from the auxiliary plate.

Step 7 Auxiliary plate with charging connector

Remove the screw that holds the auxiliary plate and take it off the chassis. Then we will desolder the main flex and flex of the vibrator and speaker.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial