We will start by removing the SIM / SD tray to be able to later remove the central case. We will also disengage the trims by prying with an opening tool.

Remove the three screws that hold the housing to the chassis and unhook it.

In this step, we disconnected the battery, the interconnection flex, the coaxial antenna cable and the digitizer flex.

Remove the four Phillips screws (PH # 00) that hold the plate to the chassis and detach the flex from side buttons and the vibrator.

Now we will lift the plate to disconnect the flex from the display and be able to remove it.

To finish, we disconnected the cameras and desoldamos the vibrator and the flex of lateral pulsers.