To start we remove the card reader with an extraction tool.

To remove the back cover we open a small hole with an opening tool and carefully unhook all the edges.

With the help of an antistatic clamp, we remove the adhesive that protects the connector, lift the tab of the connector and remove the flex from the fingerprint reader.

We remove the three Phillips screws (PH # 00) that hold the shield and thus be able to disconnect the battery to work more safely.

We remove the seven Phillips screws (PH # 00) that hold the speaker and with the help of a fine plastic tool we pry it out and remove it.

We disconnect the interconnection flex and the coaxial cable, then with the help of a fine plastic tool we take off the auxiliary plate from the display chassis and remove it.

Finally, with the help of tweezers we take off and remove the vibrator.