We will start by removing the SIM / SD tray to be able to remove the case later.

To unlock the back shell, we introduce an opening tool between it and the frame. By making lever movements around the contour, we will be able to release the notches that hold it.

We remove the Phillips screws (PH # 00) that hold the shields of the motherboard and remove them to disconnect the interconnection flex, the battery and flex screen.

We remove the four Phillips screws (PH # 00) that hold the antenna and unhook it.

We disconnect the coaxial cable and the flex from side push buttons. Now all we have to do is remove the Phillips screw (PH # 00) that still holds the motherboard to the chassis before disengaging it.

All that remains is to disconnect the camera from the motherboard.