To start we must apply heat to the back case, we have used a thermal cover, and then with a plastic pick we have taken off all the edges of the case, and we have carefully opened it, since it is connected by the fingerprint reader and a flex that connects it to the motherboard.

We remove the adhesive that protects the connector, and we can now disconnect the flex from the fingerprint reader.

We extract the eleven Phillips screws (PH # 00) that hold the intermediate casing, and with the help of a flat tool we will unhook it.

We disconnect the battery to work with greater security.

We extract the seven Phillips screws (PH # 00) that hold the speaker, and with a flat tool we unhook it.

We disconnect the bridge flex and the coaxial cable, and with a flat tool we will remove the auxiliary plate that we are going to change.