To start we must apply heat to the back cover, and with the help of a fine tool and a suction cup we open enough space that allows us to introduce a plastic spike so as not to damage the back shell.
Step 2 Intermediate housing with NFC antenna
We extract the ten Phillips screws (PH # 00) that hold the intermediate housing with the NFC antenna, and with the help of a flat tool we will disengage the intermediate housing.
Step 3 We disconnected battery
Before starting to disassemble any component of the phone, disconnect the flex from the battery.
Step 4 Lower housing
Remove the five Phillips screws (PH # 00) that hold the lower case and unhook it.
Step 5 Interconnection Flex with charging connector
We disconnect and remove the interconnection flex.
Step 6 Tray
We extract the tray of the cards.
Step 7 Auxiliary plate
Unhook the damaged auxiliary plate.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.