To remove the back cover, we will heat it at about 60ºC for about a minute to soften the adhesive that holds it. Once hot, we introduce an opening tool between it and the frame to take it off.

Before detaching the lid, we will disconnect the flex from the fingerprint reader.

To remove the shielding from the motherboard, remove the six Phillips screws (PH # 00) that attach it to the chassis and disengage it.

In this step we disconnect the rear camera, the flex from the fingerprint reader and the audio connector to remove them.

We remove the shields that cover the connectors of the lateral pushbuttons, the interconnection flex, the flex of the screen and that of the battery and we disconnect them.

Remove the Phillips screw (PH # 00) that holds the motherboard and remove the SIM / SD tray.

Now we can undo the motherboard.

To finish, we take off the shielding chamber and disconnect it from the motherboard.