With the opening tool and the tine remove the back cover. With the opening tool release the connection cable of the fingerprint reader.

Remove the 10 Phillips screws (PH # 00) that hold the two shielding parts of the connections.

With the opening tool release the connections of the base plate and remove it.

Remove the 6 Phillips screws (PH # 00) that hold the speaker module and remove it with the opening tool.

With the opening tool release the connections of the auxiliary plate and extract it.

With the pliers remove the vibrator and the coaxial cable.

With the flat plastic opening tool remove the battery.

With the tweezers, release the button clamping piece and remove them. With the tongs remove the push buttons.

With the pliers remove the handset.