We remove the SIM tray with an extraction tool.

We remove the back cover by inserting an opening tool between the housing and the mobile. Realizing all the contour we will disengage the back cover until it is completely dislodged.

Unscrew the Phillips screws (PH # 00) that hold the metal shield.

We remove the metal shield and disconnect the flex from the fingerprint reader.

Unscrew the Phillips screws (PH # 00) that hold the upper inner shell and remove it.

We disconnect the connection flexes from the rear camera and remove it.

We disconnect and remove the front camera.

We disconnect the flex from the screen, the battery flex, the interconnection flex and the coaxial cable.

Unscrew the Phillips screws (PH # 00) that hold the motherboard and remove it.

Take off and remove the proximity sensor.