First we remove the tray for the cards with the help of the extraction tool.

With the help of a fine tool we will unhook the casing, remove the six Phillips screws (PH # 00) that hold the intermediate casing, and disconnect the interconnection flex between the fingerprint reader and the base plate.

We disconnected the battery to work with greater security.

We extract the eight Phillips screws (PH # 00) that hold the lower housing and the loudspeaker module, and with the help of a fine tool we will unhook it.

We disconnect the flex bridge and the coaxial cable, and with the help of a flat tool, we will take off the damaged auxiliary plate that we have to replace.