First we remove the tray for the cards with the help of the extraction tool.

With the help of a fine tool we will unhook the casing, remove the six Phillips screws (PH # 00) that hold the intermediate casing, and disconnect the interconnection flex between the fingerprint reader and the base plate.

We disconnected the battery to work with greater security.

We extract the eight Phillips screws (PH # 00) that hold the lower housing and the loudspeaker module, and with the help of a fine tool we will unhook it.

We disconnect and remove all the cameras that are connected to the motherboard.

Disconnect the flex screen, the coaxial cable, remove the four Phillips screws (PH # 00) that hold the motherboard, and we can lift it.

We take off the lateral push buttons.

We take off the proximity sensor and the headset.

Take off the battery, and unhook the coaxial cable.

And to finish we just have to take off the auxiliary plate and the vibrator.