We extract the tray with the help of the extraction tool.

We apply heat to the back shell and with the help of one or more tines we will take off the back shell.

We disconnect the interconnection flex that connects the fingerprint reader to the motherboard.

We extract the ten Phillips screws (PH # 00) that hold the intermediate casing, but we must take off the flash module, since underneath is another Phillips screw (PH # 00), and we can unhook the casing.

We disconnected the battery to avoid possible damage.

Now we remove the six Phillips screws (PH # 00) that hold the speaker and with the help of a flat tool unhook the speaker.

We disconnect the interconnection flex, and with the help of a fine tool we will disengage the auxiliary plate that we have to replace.