We extract the tray with the help of the extraction tool.

We apply heat to the back shell and with the help of one or more tines we will take off the back shell.

We disconnect the interconnection flex that connects the fingerprint reader to the motherboard.

We extract the ten Phillips screws (PH # 00) that hold the intermediate casing, but we must take off the flash module, since underneath is another Phillips screw (PH # 00), and we can unhook the casing.

We disconnected the battery to avoid possible damage.

Now remove the six Phillips screws (PH # 00) that hold the speaker, disconnect the coaxial cable, and with the help of a flat tool disengage the speaker.

We disconnected the interconnection flex.

We disconnect the components that are connected to the motherboard.

We disconnect the remaining components.

Remove the motherboard.

We remove the coaxial cable.

We take off the battery using a flat tool.

We extract the lateral push-buttons with the help of a fine metal spike.

To finish, we just have to unhook the auxiliary plate and take off the vibrator of the full screen that we have to replace.