Huawei G8 - Vibrator

Guide with all the steps necessary for you to change the vibrator of the Huawei G8 yourself.

Difficulty
1
2
3
4
5
Ir arriba
TutorialsSmartphonesHuaweiHuawei G8Vibrator

For this tutorial you will need the following spared parts and tools

10pcs Anti-static Rubber ESD Finger Cots
2,68 €
Professional disassembly spatula for mobile phones and smartphones
2,71 €
SIM card removal tool for all brands
1,61 €
Screwdriver with 8 heads Peng Fa 7339A
6,96 €
Opening tool Smartphone, tablet
2,19 €
JAKEMY JM-OP12 - Opening Tool for tablets, smartphones, laptops and other devices
4,62 €
ESD-12 precision antistatic tweezers with fine tip
2,17 €
Motor vibrator for Huawei G8
1,04 €
Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 Huawei G8

Dimensions : 76.5 x 152 x 7.5 mm
Weight : 167 g
SoC : Qualcomm Snapdragon 616 MSM8939v2
Processor : 4x 1.5 GHz ARM Cortex-A53, 4x 1.2 GHz ARM Cortex-A53,
Number of cores: 8 Graphics processor: Qualcomm Adreno 405
RAM memory : 3 GB, 800 MHz
Internal memory: 32 GB
Memory cards: microSD, microSDHC, microSDXC Display: 5.5 in, IPS, 1080 x 1920 pixels, 24 bit
Battery: 3000 mAh, Li-Polymer (polymer lithium ion)
Operating system : Android 5.1.1 Lollipop
Camera : 4160 x 3120 pixels, 1920 x 1080 pixels, 30 fps
SIM card: Nano-SIM / microSD, Nano-SIM
Wi-Fi: a, b, g, n, ac, Wi-Fi Hotspot
USB : 2.0, Micro USB
Bluetooth : 4.0
Location / Navigation: GPS, A-GPS, GLONASS

Before setting up, make sure that the mobile is switched off.

Step 2 SIM and SD cards

Remove the tray with SIM and SD cards.

Step 3 Back case

Peel off the covers that cover the housing screws.

Step 4 Screws

Remove the Phillips screws that secure the housing.

Step 5

Separate the back cover by prying it with an opening tool.

Step 6 Fingerprint reader

Remove the shield covering the connectors on the motherboard, held by 2 Phillips screws.

Step 7

Unplug the flex on the motherboard and pull gently to detach it.

Step 8

Remove the second shield, held by 1 Phillips screw.

Step 9 Motherboard connections

Unplug the flex from the bottom of the motherboard.

Step 10

Remove the rear camera.

Disconnect the upper end of the coaxial cable.

Step 11 Motherboard

Separate the base plate, held by 1 Phillips screw.

Step 12 Vibrator

Finally, remove the vibrator from the chassis with a spatula.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial
Keywords: