To start, we apply heat to the back cover to soften the adhesive that holds it, and with the help of a plastic spike we will take off all the edges of the case.

We disconnect the interconnection flex between the fingerprint reader and the motherboard with the help of an opening tool and tweezers.

Remove the twelve Phillips screws (PH # 00) that hold the intermediate housing and unhook it.

We will disconnect the battery to work with greater security, and also the interconnection flex between the fingerprint reader and the motherboard, to work with greater comfort.

We remove the tray from the cards.

We disconnect and remove components.

We finish disconnecting the components that are connected to the motherboard, and we can remove the motherboard.

With the help of tweezers, we take off the area of the contacts, and with a tool thin enough we will take off the area of the buttons.