We will start by removing the back cover. For this we will use a plastic opening tool, to avoid scratches, introducing it between the back shell and the frame.

Now, to remove the back cover, we will have to locate and remove the eight Phillips screws (PH # 00) that hold it.

Once the screws are removed, with the help of a tine we will separate the frame housing.

In order to remove the base plate, first we have to disconnect the flex from the display and the one from the side push-button panel. Then we will have to remove the two Phillips screws (PH # 00) that hold it.

In order to completely remove the plate, first we have to disconnect the flex from the bottom plate and the coaxial cable.

With the motherboard outside, we only have to disconnect the front camera to remove it.